Reschedule of Quiz 2 re-test

There was supposed to have been a blog post this past Sunday that was to provide details about the re-test for Quiz 2.

Since that notice did not go out, I would like to move the date of the quiz to next Tuesday, November 12.

The following are the instructions for taking the quiz and a few practice parts with my solutions.

Instructions:

1. In order to take the quiz you need access to an internet connected computer that has SolidWorks 2013 installed. 
2. You will be taken this quiz outside of the normal lab hours.
3. You are responsible for following the detailed instructions included with the quiz sheet.
4. The quiz duration is 35 minutes and will be give at two times 6:00 PM and 9:00 PM.
5. If you plan on taking the quiz using a UML ME Lab computer, then you should make sure that you arrive early to the lab so that you are seated and logged on by the time the quiz begins.
6. At the designated quiz time (6PM) or (9PM) you should click the link below to access the quiz directory on the course Google drive.
7. You should then open the folder that corresponds to the last digit of your Student ID and download the PDF it contains.
8. You should follow the quiz instructions EXACTLY. There will be dimensions that you need to modify - these modifications will be based on your Student ID. You must also use the designated naming convention.
9. At no later than 6:36 PM or 9:35 PM, you should have submitted your completed quiz. The quiz submission will be in the form of a SolidWorks Part and you will submit the part via email to 22201sullivan@gmail.com.

Quiz 2 Re-test Google Folder

Practice Parts:

The following parts are representative of the type of part you will be required to create during the Quiz 2 re-test.

Part A - Solution

 Part B - Solution

Part C - Solution

Part D - Solution